Wished: Rubber part in a 6×30 finder extent. Wanting the plastic part for a 6×30 finder extent.

# 1 Jond105

Travel Us To the Moon

topic beginning

  • Stuff: 5,545
  • Joined: 19 Feb 2018
  • Loc: Detroit

    • It won’t occur place best without active. Thanks proper exactly who might know where I am able to get one

    Attached Data

    • IMG_3917.PNG99.91KB 2 downloads

    number 2 Jim Davis

  • Posts: 4,817
  • Joined: 05 Jul 2014
  • Loc: Lewisberry, PA

    • If you’re talking about the o-ring, go to a great devices shop that handles plumbing products. Ask for services, they may not need o-rings on show.

    • Jon Isaacs and Steve Cox like this

    #3 Jond105

    Travel Me to the Moonlight

    topic starter

  • Posts: 5,545
  • Joined: 19 Feb 2018
  • Loc: Detroit

    • Cheers I’ll inspect you aside. I wasn’t yes

    no. 4 Jim Davis

  • Content: 4,817
  • Joined: 05 Jul 2014
  • Loc: Lewisberry, PA

    • You will want one that is virtually as large as the range, and it’ll should be fairly thin. O-rings you shouldn’t stretch a great deal, unlike elastic bands. Grab the scope and mount on the shop to be certain the band is the right width.

    • Jond105 likes your

    number 5 bartine

  • Stuff: 2,083
  • Joined: 03 Oct 2007
  • Loc: Sterling Silver Spring Season, MD

    • Also – i have used a locks hookupdate.net/pl/uniformdating-recenzja / pony tail musical organization and – not quite as good as an O-ring, but low priced.

    number 6 BSJ

  • Blogs: 1,536
  • Joined: 22 Dec 2008
  • Loc: VT

    • Finding the plastic bit for a 6×30 finder scope. It won’t occur spot right without moving around. Many thanks proper who might see in which I’m able to acquire one

    You want an O-Ring-2mm large with a 31mm ID. I changed my personal rotten O-rings with silicon. Wishing they will certainly last for a longer time.

    • Jond105 loves it

    #7 kfiscus

    Travel Me to the Moonlight

  • Articles: 7,192
  • Joined: 09 Jul 2012
  • Loc: Albert Lea, MN, USA

    • You’ll have better luck on devices shop if you take the finder as well as its mount to make sure your suit is right. We speak from event. The variety of O-ring models try confounding.

    • Jond105 loves this

    #8 AnthonyP

  • Posts: 1,143
  • Joined: 19 Feb 2006
  • Loc: Toronto, Ontario

    • Shopping for the rubber portion for a 6×30 finder range. It won’t set-in put best without getting around. Thanks for anyone exactly who might learn in which i will acquire one

    Did you get your range used? I did so and that I have the same challenge with my finderscope. No o-ring and also the finderscope stored getting bumped from positioning.

    I’ll be heading to Home Depot or Lowes this weekend to pick one up. For those who haven’t had gotten one of those sites close by, I am able to get two and post one off to you.

    # 9 Jond105

    Travel Me to the Moonlight

    topic beginning

  • Articles: 5,545
  • Joined: 19 Feb 2018
  • Loc: Detroit

    • I did buy it used and it’s really the way it arrived. No significance of the o band though in so far as I value the deal. I am going to conclusion

    up replacing it with a 8×50 In my opinion that’s k you once again for your present.

    #10 AnthonyP

  • Content: 1,143
  • Joined: 19 Feb 2006
  • Loc: Toronto, Ontario

    • We wound up at Lowes past. Discovered the o-ring. Proven out of the finder scope therefore works like a charm now

    • Jond105 enjoys this

    #11 Jond105

    Travel Us To the Moonlight

    subject beginner

  • Stuff: 5,545
  • Joined: 19 Feb 2018
  • Loc: Detroit

    • AnthonyP, we gotta inquire now, exactly what o-ring from lowes was just about it when you can bear in mind off hand?

    #12 AnthonyP

  • Articles: 1,143
  • Joined: 19 Feb 2006
  • Loc: Toronto, Ontario